SDS

MSDS
Report No.: BST14100910Y-1RR-4 Date: Nov. 06, 2014 Page 3 of 7
Material Safety Data Sheets
This report shall not be altered,increased or deleted.The results shown in this test report refer only to the sample(s) tested. Without written approval of BST, this
test report shall not be copied except in full and published as advertisement. BST Physical & Chemical Lab.
Dongguan BST Testing Co., Ltd.
.
E-mail:[e-mail]
Complaints hotline:[phone]
A1201-1203 Xinsanqi Of Dongbao Road, Dongchen
District, Dong guan, Guangdong, China
Tel:[phone]
Http://www.bst-lab.com
Section 4 - First Aid Measures
First Aid:
Eyes: Flush with plenty of water, Get medical attention.
Skin: Wash thoroughly with soap & water.
Inhalation: Remove to fresh air, Get medical attention.
Ingestion: Do not induce vomiting, Keep warm. Get medical attention.
The most important symptom and harm effect: Acid burn.
The protection to the first aid person: According to procedure to disposal.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand,
msha/niosh (approved or equivalent), and full protective gear. Vapors can travel to a source of ignition and flash
back. Will burn if involved in a fire. Flammable liquid and vapor.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 45deg C (113.00 deg F)
Autoignition Temperature: Not available.
Explosion Limits, Lower: Not available.
Upper: Not available.
NFPA Rating: Not published.
Section 6 - Accidental Release Measures
Spill Release Procedures:
Use Proper Personal Protection: Remove all ignition sources. Use suitable absorbent materials and recover
for proper disposal.