User Guide

JUMP STARTING YOUR ENGINE
1. Ensure your engine is completely OFF.
2. Securely connect the Smarty Clamps
®
to your Weego 44, then power ON.
3. Attach BLACK clamp to your battery’s negative (-) terminal, then the
RED clamp to your battery’s positive (+) terminal. Adjust your
Smarty Clamps
®
to achieve MAXIMUM contact with the terminals.
Poor connections will prevent you from starting your engine! Clear off
any dirt or build-up with a wire brush or a dry towel before connecting
your clamps.
4. Place your Weego 44 in a secure location or suspend using the provided
hook & lanyard so it won’t fall. Check your Smarty Clamps
®
lights.
5. When you have a FLASHING GREEN READY light, start your engine. If the engine
doesn’t start, turn off your vehicle and check your Smarty Clamps
®
lights.
6. After a successful start, quickly disconnect the Smarty Clamps
®
from
your Weego 44.
7. Detach the Smarty Clamps
®
from the battery.
8. You’re now good to go - be sure to run your engine for at least 15 minutes
before shutting it off again so it has time to recharge your battery.
If you are having issues getting your engine started, see the Troubleshooting
section in your quick start guide, owners manual or on myweego.com for further
details and assistance.
WARNING!
Exposed Metal Jaws May Be HOT After Use!