Material Safety Data Sheet

Shenzhen Anbotek Compliance Laboratory Limited
Page 2 of 8
Report No. R0117030156B
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations
of liability, indemnification and jurisdictional issues defined therein. The results shown in this report refer only to the sample(s) tested unless
otherwise stated. This Test Report cannot be reproduced, except in full, without prior written permission of the company.
Shenzhen Anbotek Compliance Laboratory Limited
Address: East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Tel: [phone]
Fax: [phone] Email: [e-mail] Http: //www.anbotek.com.cn
Section 1. Chemical Product and Company Identification
Section 2. Composition/Information on Ingredients
Products Name: Jump Starter
Model Number: N22 , N22S
Rating: Nominal Voltage: 11.1V
Rated Capacity: 1800mAh , 19.98Wh
Input:DC5V Output: DC5V,9v,12v
Weight: 282.85g
MATERIAL SAFETY DATA SHEET
Substance/preparation: preparation
Chemical Name
Percent of Content
CAS No.
Lithium Cobalt Dioxide
(LiCoO
2
)
25%~35%
12190-79-3
Graphite (C)
15%~20%
7782-42-5
Poly Vnylidene
Fluoride (PVDF)
1%~5%
24937-79-9
Acetylene Black
0.5%~3%
1333-86-4
Aluminum(AL)
21%~23%
7429-90-5
Copper(Cu)
10%~11%
7440-50-8
Electrolyte
10%~15%
623-53-0/ 21324-40-3