User Manual

Assemble WeeeBot
Steps:
1. Install left side panel (The strip surface faces toward the outside),
and two beam 1030-100-B (The convex surface faces toward the outside).
2. Install right side panel (The strip surface faces toward the outside).
Steps:
1. Install 2 x TT Motors.
2. Install the backside beam (The convex surface faces toward the outside).
Assemble WeeeBot Body Structure
‒ Install the front beam and side panel
Assemble WeeeBot Body Structure
‒ Install motor and backside beam
2X Beam 1030-100-B
8X Screw M4*6
1X Left Side Panel
1X Right Side Panel
2X TT Motor
4X Screw M3*25
4X Nut M3
1X Beam 1030-100-B
4X Screw M4*6
Left side panel installation diagram
(Right side panel is the same)
Left side panel installation diagram
(Right side panel is the same)