User Manual

Assemble WeeeBot
1X RGB Ultrasonic Sensor
2X Screw M4*6
4X Nut M4
4X Screw M4*6
1X LED Panel Module
Tip：Please follow the installation
guide in the left side.
Install RGB Ultrasonic Sensor
Install LED Panel Module
Steps:
1. Install 4 x Screw M4*6 and 4 x Nut M4. Do not lock them.
2. Match the 4 screws with the gap on LED Panel Module.
3. Lock 4 x Screw M4*6 with nut.
Left side panel installation diagram
(Right side panel is the same)