User Guide

V1.0
Install Driver
For Windows system, driver will be installed at the same time while installing WeeeCode.
For Mac OS system, once finished installation, please click “Driver” on WeeeCode menu bar, and install driver for
hardware.
Connect
Once driver installed, your computer can identify WeeeMake robot. Follow below steps to connect your robot to
your computer:
• Use USB cable connect your robot to your computer, select the robot type.
• Click “Not Connected” on WeeeCode and select serial port for your robot. (Windows will show “COM X”, Mac
OS will show “wchusbserialXXXX”)!
! of !3 6
WEEEMAKE CO., LTD.