WeeeBot Extended Form A Smart Light Robot
introduction “Sm a r t L a mp”uses light sensor, sou n d s e ns o r a s t he control switc h. When t h e ro bot i s i n a d im light environment , RGB L E D w i l l t u r n on a utomatica lly; w h en t h e ro bot i s i n a b right light environmen t , m ak i n g a s o u nd ca n turn on the ligh t an d m a k i n g a n other sound ca n tur n off th e l i g h t .
1 Installation 1 4xScrew M4*6 2 2xBeam 1030-100-B 1x18650 Battery Holder 2xScrew M4*6
3 4 2xBeam 1030-100-B 6xScrew M4*6
2xScrew M4*6 5 6 2xNut M4
2 Wiring 1x4P4C Cable-20cm 1X Power cord Connect to Port B
3 Completion Figure
4 Wiring 18650 Battery Holder RGB Ultrasonic Sensor
5 Sample Program Through judging the intensity of ray light in the environment, if the light is weak, turn on the bulb. If the light is strong, the bulb is determined by the loudness of the sound. Through judging the loudness of a sound in the environment，if it’s in a loud voice, (clap hands) turn on the bulb. If it’s in a low voice, the bulb remains off. At the first time people clap hands, the variable a adds one into one. In the case of satisfying the judgment, turn on the bulb.
Manufacturer: WEEEMAKE Technology Co., Ltd Address: No. 210-212, Building C, Shiwai TaoyuanOriginality Park, Pingshan 1st Rd, Nanshan District,Shenzhen, Guangdong Province, China, 518000 Product Standard Code: Q/WMZX001-2018 Service Hotline: +86 755 86532012 Email: support@weeemake.com Website: www.weeemake.
