User's Manual

Cisco High-Density Analog Voice and Fax Network Module

voice-port

Cisco IOS Release 12.2(2)XT and 12.2(8)T

voice-port

To enter voice-port configuration mode, use the voice-port command in global configuration mode.

Cisco 2600, and Cisco 3600 Router

voice-port {slot-number/subunit-number/port}

Syntax Description

Defaults No default behavior or values

Command Modes Global configuration

Command History

Usage Guidelines Use the voice-port command in global configuration mode to switch to voice-port configuration mode

from global configuration mode. Use the exit command to exit voice-port configuration mode and return

to global configuration mode.

Examples The following example accesses voice-port configuration mode for port 0, located on subunit 0 on a

voice interface card installed in slot 1 for the Cisco 3660 series:

voice-port 1/0/0

slot-number Slot number in the Cisco router in which the High-Density Analog Voice

and Fax Network Module (NM-HDA) is installed. Valid entries are from 0

to 3, depending on the slot in which it has been installed.

subunit-number Subunit on the NM-HDA in which the voice port is located. Valid entry is 0.

port Voice port number. Valid entries are 0 to 21.

slot The router location in which the voice port adapter is installed. Valid entries

are from 0 to 3.

port

• Indicates the voice interface card location. Valid entries are 0 to 21. See

Table 1 on page 2 for port numbering.

Release Modification

11.3(1)T This command was introduced.

11.3(3)T Support for Cisco 2600 series routers was added.

12.0(3)T Support for the Cisco AS5300 access server was added.

12.0(7)T Support for the Cisco AS5800 universal access server, the Cisco 7200 series

router, and the Cisco 1750 router was added. Arguments for the

Cisco 2600 series and Cisco 3600 series router were added.

12.2(2)XT This command was modified on the Cisco 2600 series, the Cisco 3640 series

and the Cisco 3660 series to accommodate the additional ports of the

NM-HDA.

12.2(8)T This command was integrated into the Cisco IOS Release 12.2(8)T.