Blower Instruction Manual

5
SELECT AN EXTENSION CORD
Use only a 120 A.C. voltage supply as
shown on nameplate of the unit to
power your blower.
Theextensioncordusedtoreachthe
power source must be:
D Specifically marked as suitable for out-
door use. The cord must be marked with
the suffix “W- A” (in Canada “W ”) .
D Heavy enough to carr y full current from
the power source to the unit. Otherwise,
loss of power and overheat i ng can oc-
cur causing damage to unit . Ref er to
tab le for mini m u m wir e gauge recom-
mendations. The cord must be marked
wit h the proper wire gauge. (Appropr i ate
extension cords are available. ) Do not
use multi pl e cords.
D In good condition. Cord i nsu lati on must
be intact with no cracks or deteri or at i on.
Plu g connectors must be undam a ged .
DO NOT use mult i ple cords.
MINIMUM WIRE GAUGE
RECOMMENDATIONS
VOLTS
25 FT. 50 FT. 100 FT.
120
16
A.W .G.*
16
A.W.G.*
*American Wire Gauge
14
A.W.G.*
Secur e the extension cord t o the uni t by
threading the cord through the cord re-
tainer (see illustration). Insert the cord
rece ptacle into the rece sse d plug.
CAUTION: Failuretousecordretain-
er could result in d amage to the unit,
extension cord, or both.
Cord
Retainer
Cord
Receptacle
Recessed
Plug
on Unit
USING YOUR UNIT
KNOW YOUR ELECTRIC BLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE O PERATING YOU R
UNIT.
Compare the illustrations to your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Top Handle
Air Vents
ON/OFF
Switch
Blower Tube
Cord
Retainer
Tube Release Button
ON/OFF SWITCH
The
ON/OFF SWITCH is used to activate
the motor.
BLOWER TUBE
The
BLOWER TUBE is designed to direct
the flow of air.
TUBE RELEASE BUTT ON
The
TUBE RELEASE BUTTON secures the
blo w er tube or elbo w tube to t he blowe r
unit during operati on. Also, pressing the
tube release button allows removal of the
blower tube or elbow tube.