Specifications

43
Fuel Lines Broken inside tank
The fuel lines on a Weed eater are notorious for degrading over time and
eventually breaking. The fuel filter located on the small fuel line usually needs
replacement by this stage. However this does not mean the end of your weed
eater! The small and large fuel lines
can be replaced and refitted simply
with minor skill involved. The small
fuel line is the suction line
providing gas to your carburetor
from the gas tank. The filter
ensures that no materials other
than the gas is supplied to the carburetor. The large fuel line is the gas return
line from the carburetor. Any excess unused gas is sent straight back to the
gas tank.
Follow the listed steps and video tutorial link below to replace the large and
small fuel lines on your Weed eater carburetor:
Safety: Do not forget to use safety glasses and gloves
1. Open the gas tank cap and pull out the gas filter. Remove any debris or
broken fuel lines in the tank.
2. Remove the small and large fuel lines from the tank. The small line is
the fuel suction line supplying gas to the carburetor. The large line is the fuel
return line sending excess gas back to the tank.
3. The fuel filter is attached to the small fuel line only.
4. Purchase the small and large fuel lines and filter.
5. Push the large fuel line back through the hole in the gas tank about an
inch.