Specifications

36
NOTE: Remove and use washer and wing nut from this bolt for assembling
shield.
FUEL YOUR UNIT
This engine is certified to operate on unleaded gasoline. Gasoline must be
mixed with a quality 2-cycle air-cooled engine oil designed to be mixed at a
ratio of 40:1.Poulan/Weed eater brand oil is recommended. (A 40:1 ratio is
obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline).
When mixing fuel follow the instructions printed on the container. Always
read and follow the safety rules under FUEL SAFETY.
STARTING
HOW TO STOP YOUR UNIT
Push and hold engine stop switch in the STOP or OFF position until the Weed
eater unit has fully stopped.
There are a number of ways one must have to follow in order start the weed
wacker. In this topic we will try to cover up all the details regarding the startup
of the weed wacker and the problems that could be the reason for the startup
of the weed wacker. Weed Wacker are the kinds of devices that are handled
with care and professionalism. There are number of weed wacker of different
types that are available in the market. These weed wacker has some
techniques used in order to start them Sometimes these techniques may be