Specifications

27
just squeeze the string through the tiny hole and bump several times to re-
line. Quick feeder is available in shops specialized for gardeners as an
additional feature for Weed eater. Force keeps the string taut and it feeds
automatically when it becomes worn.
4. Once the spool is wrapped, put it back on the trimmer head. Line the
spool with a slot on the head so it could fit in and pull the trimmer line
through the socket. Rotate the spool by about 45 degrees, or as much as it can
be tightened. In case you have dual line Weed eater trimmer, use the retainer
on the side to hold the nylon line while replacing the other. Reattach the
retaining cap to assemble the string trimmer again. It makes much easier if
you do not need to look for a cap while holding the string to prevent
unwrapping. Your Weed eater is now ready to go!
Note: For a Video tutorial on how to replace trimmer line please follow this
link.
Take your new roll of the string and measure the length of the string that is
needed to be replaced. You need to have the string cutter as well so that it
would be easier for you to cut the strings. Take one side of the string from the
roll and string inserting into the eyelet of the trimmer and make it sure that
the length of the string does not get exceeded and then cut the string into the
second half. As soon as you are done with that you need to put the second
string into the second eyelet of the eyelet. Cut that string to after the
sufficient length. The reamer head had two portions. The lower portion is
made to tighten up the string to the required level.
After you tight the string form both ends make it sure that the directions of
the strings are set. These strings are manufactured in such a way that there is
a curve in the string that helps the trimmer to trim the grass. To ensure the
maximum output you must check that there should be no losing in the string
because the loosing may cause the malfunctioning of the trimmer as every
component is connected to each other and this may result in the effective
efficiency of the trimmer.