Specifications

26
How To String A Weed Wacker
The string is mounted in the eyelet of the trimmer head. The trimmer head is
connected to the shaft of the weed wacker that is responsible for the
movement of the weed wacker. Between the guard and the hole of the
trimmer you can see the hole openings through which the string has to be
passed. First of all never pulls the older string with the force as it's delicately
made. The stings can be easily pulled out of the holes and then you just need
to replace that string with the new one.
Rewinding the trimmer head usually means that you must disassemble the
spool on your trimmer product. Only the new string trimmers have a spool
that manually loaded once lasts, until the cord is worn. Those lawn trimmers
are double lined but the nylon string is one piece. The replacement line has
not have the ends protruding out: it is arched and feeds automatically, unlike
the one on bump trimmers. To bump the trimmer head means to press it on
the ground while operating, to “bump” head feeder that extends the trimmer
line.
Please check out the step-by-step instructions and video tutorial link below
on how to replace trimmer line:
1. Restring Weed eater trimmer by removing the cap on the trimmer
headfirst. Unscrew it and put close to hand. You will see later why is important
to keep the cap in a know place.
2. As you have removed the cover, the spool comes off. See what trimmer
style you own- single or double line. Dual lined trimmers have two channels to
re-line. Cut a 10 to 25 feet long replacement line and find the small hole on
the spool. Tip: cut the end of the trimmer line angled to make handling easier.
3. Pass the end of the cutting line through the starting hole. Now look at
the arrow for direction when wrapping- it shows the way you should wind the
spool. Wrap the spool in rows precisely so it could feed the line from the
trimmer head properly. An untidy wrapped string could snag when trimming.
Some line trimmers have a quick feeder for fast replacing. When restringing,