Specifications

16
monitoring. The shaft sometimes may heat due to the excess use or the
overload of the weed wacker but you don’t have to worry about the heat.
Normally the parts like the shaft have heat emission during use. The shaft can
be lubricated using the grease but people often don’t use the phrase instead
the lubrication oil is suggested by most of the companies. These lubricants are
also available in different forms. Especially the spray oil is widely used by a
number of users. After some usage of the weed wacker it should be given a
rest and then you can check the level of mobility of the shaft. The shaft can be
replaced but it takes some time to replace it but commonly shaft does not
require being replaced often.