Specifications

10
length and then load the line with the holes of the head passing from one end
to the other end. After that you need to cut the string from the both ends. As
soon as you have cut down the string you need to load the line by simply
turning up the large knob on the trimmer head. This knob can be managed
with the bare hands. When you turn the knob the string comes to the right
place you can stop the knob where you want it to. As soon as the string is
adjusted you can move the knob on the head to tight the string. The string
works on clockwise direction to cut down the weed on the ground.