User Manual

1. Mute the speaker: in the playback state, click the speaker button, and the
top light strip will turn into a steady blue light. If the microphone is muted,
press the speaker mute button, the microphone and speaker will be muted at
the same time, and the red light strip at the top will blink as breathing.
2. Speaker mute release: When the speaker is muted, click the speaker mute
button, and the top light strip will turn into a steady blue light.
Volume adjustment
1. Volume increase: Press the volume + button of any wireless microphone to
increase the call volume or music volume. If multiple wireless microphones
are connected, the volume of all connected wireless microphones will
increase at the same time.
2. Volume reduction: Press the volume - button of any wireless microphone to
reduce the call volume or music volume. If multiple wireless microphones are
connected, the volume of all connected wireless microphones will be reduced
at the same time.
3. A "Click" sound will appear when the volume is at maximum or minimum.
Resetting
When the wireless microphone is turned on and the computer data is not
connected through USB, press and hold the speaker mute button and the
microphone mute button for 5 seconds at the same time, the wireless
microphone is reset, the pairing record is cleared, and the voice prompts
"Reset completed", "Ready to pair", automatically Enter the pairing state, the
top blue light is always on, and the side pairing white indicator light flashes.
Charging and battery indicator
1. Charging: Connect the USB cable to the wireless microphone and the
5V charger (need to purchase the charger separately). When charging, the
red light of the power indicator is always on; when it is fully charged, the
white light is always on. When charging, it can be wirelessly connected to
the computer through the Dongle and can be used normally.
2. Battery display:
Battery remaining 70%-100%: the power indicator light is always on white;
10%-70%: the white light is always on for 30s every 200ms; Below 10%:
the red light flashes once every 2 seconds with the voice "Battery Low"
every five minutes; It will automatically power off when the battery power
is too low.