User Manual

2. If you enter the UAC connection state(A single wireless microphone is
wired to connect to the computer), press the pairing button twice to enter
the UAC connection state, it will comes with the voice "USB Mode", and
the wireless microphone stops the radio frequency related functions (such
as reconnection, connection, etc.), perform the functions in the USB state.
After the UAC connection is completed, the top light strip blinks once and
then the blue light stays on.
3. In the normal connection state of UAC, press the pairing button twice to
exit UAC mode, it will comes with the voice "Wireless Mode" to turn on the
radio frequency, and enter reconnection mode (if there was a pairing
record) or pairing mode (if there is no pairing record).
4. When the wireless microphone is turned off, use the USB data cable to
connect it and the computer, the wireless microphone is charged only(the
power red indicator indicates the charging state). Press and hold the
power button for 2s to power on, if you want to enter the UAC state, you
can press the pairing button twice.
Note：
1. Connect the wireless microphone and the computer with a USB data cable.
No matter whether the wireless microphone is turned on or not, if the pairing
button of the wireless microphone is not pressed twice, the USB data cable
only charges it, and do not transmit data between the wirelss microphone and
the computer. At this time, the wireless connection and operation of Dongle
and wireless microphone will not be affected.
2. When the wireless microphone is connected to the USB data cable (not
charging state), if you unplug the USB cable, and the wireless microphone will
automatically power off.
3. When the wireless microphone is connected with the USB data cable, long
press the wireless microphone power button for 2 seconds, it will be turned
off and enter the charging state.
Mute the microphone
1. Mute the microphone: During a call, click the wireless microphone mute
button of any wireless microphone, the red light strip on the top of the
wireless microphone is always on, the microphone is disabled, the other
party cannot hear the sound, and the voice prompts "click".
2. Unmute the microphone: in the mute state (when the red indicator of the
light strip is always on), click the wireless microphone mute button, the
blue light strip is always on, the voice prompts "click".
Mute the speaker