Daisy Chain Wireless Microphone User Manual
Note: Please read the user manual carefully before using the product and keep it properly. And the pictures are for your reference only. Product List Conference Omnidirectional Wireless Conference(With Dongle）x1 USB-C Cable x1 User Manual x1 Product Spec.： Wireless type Effective distance Call distance 2.4GHz Play time Call time About 6H About 6H Charge time Capacity Rated input About 2H 1500mAh 5V-1.
Product Structure：
1. Mic mute 2. Volume — 3. Power indicator 4. Power button 5. Volume + 6. Speaker mute Operating Instruction 7. Connection indicator 8. Connection button 9. LED indicator 10. Mic（4pcs） 11. USB-C port 12. USB Dongle Power on/Power off： 1.
1. The Dongle is plugged into the computer, and the pairing indicator of the Dongle and the wireless microphone blinks in white after the wireless microphone is turned on. The reconnection time is 5 minutes. If there is no reconnection for more than 5 minutes, the wireless microphone will automatically power off. 2. When the Dongle and the wireless microphone are not paired well: both the Dongle and the wireless microphone need to enter the pairing mode firstly. 2.
power off. 2.2.2 After the resetting of wireless microphone： It will automatically enter the pairing mode when it is turned on, and the white indicator will flashes quickly. If it is not paired successfully after 5 minutes, it will automatically power off. 2.3 Dongle and wireless microphone paired successfully. The white indicator of the Dongle is always on, and the pairing indicator of the wireless microphone is always on, and the pairing is successful.
2. If you enter the UAC connection state(A single wireless microphone is wired to connect to the computer), press the pairing button twice to enter the UAC connection state, it will comes with the voice "USB Mode", and the wireless microphone stops the radio frequency related functions (such as reconnection, connection, etc.), perform the functions in the USB state. After the UAC connection is completed, the top light strip blinks once and then the blue light stays on. 3.
1. Mute the speaker: in the playback state, click the speaker button, and the top light strip will turn into a steady blue light. If the microphone is muted, press the speaker mute button, the microphone and speaker will be muted at the same time, and the red light strip at the top will blink as breathing. 2. Speaker mute release: When the speaker is muted, click the speaker mute button, and the top light strip will turn into a steady blue light. Volume adjustment 1.
■ Important Safety Information • Avoid falling. •Do not disassemble. • Avoid extreme high or low temperatures. • Do not immerse in water. • Do not expose this product to dripping or splashing water. • Do not expose this product to excessive heat such as sunlight, fire, or the like. • Use original or certified cables. • Clean with a dry, soft, lint-free cloth. Do not use aggressive cleaners or oils. • Do not use this product outdoors during thunderstorms.
