Demolition Hammer ITEM NO JH-95A USER MANUAL Read this manual thoroughly before use and keep it for future reference!
a Hold the tool with its flatted part directed upward b Front cover c Stop lever d Wear limit e No.
GENERAL OPERATION PRECAUTIONS 1. Keep work area clean. Cluttered areas or benches invite injuries. 2. Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use tool in presence of flammable liquids or gases. 3. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges or refrigerator shell. 4. Keep children away. Do not let users touch the tool or extension cord.
containing chloric annex may damage and crack plastic parts. Do not wipe them with such solvent wipe plastic parts with a soft cloth lightly dampened with soapy water. 25. Consult an authorized service agent in the event of power tool failure. 26. Use only original. Replacement parts. 27. This tool should only be disassembled for replacement of carbon brushes. PRECAUTIONS ON USING HAMMER 1. Wear protective glasses to protect your eyes. 2. Wear a mask when turning your head upward. 3.
Caution Sometimes the tool does not begin the striking stroke even when the motor rotates because the oil has become thick. If the tool is used at low temperatures or if it is used after a long time idle. The tool should be used running in for five minutes in order to warm it up. OIL FEEDING Prior to oil feeding always disconnect the plug from the power supply receptacle. Since an oil chamber is built in this electric hammer. It can be used for approximately 20 hours without supplying lubricating oil.