User's Manual

19
Troubleshooting Guide
Troubleshooting
PROBLEM POSSIBLE CAUSES SOLUTION
Craft does not
respond to controls.
ű No power to remote
or craft.
ű Poor contact between
power plugs.
ű Craft is out of range.
ű Check remote batteries,
replace if needed.
ű Check craft battery, be
sure it is fully charged.
ű Be sure the power plugs
are firmly connected.
ű Be sure the remote has
an unobstructed line of
sight to the craft.
ű Remain within the
remote’s 300 ft. range.
Craft is difficult
to control or flies
erratically.
ű Gyroscopes may
be misaligned.
ű Power OFF remote and
craft and reconnect
(see pg. 9).
Craft drifts
while in flight.
ű Trim not set or needs
adjustment.
ű Adjust trim settings
(see pg. 11).
Craft suffers from
mechanical trouble.
ű Damage to body,
rotors or other major
components.
ű Repair or replace parts
as needed.
LED lights ON but
craft does not
respond to controls.
ű Low battery power. ű Recharge the battery.