Installation Guide

FLOW

ADJUSTABLE

Flow Path Adjustment

& Handle Instructions

• Webstone valves with the T-Flow Adjustable Flow Path may be quickly and easily recongured to drain from

the other side of the ball by removing the handle and turning the stem 180°. (Illustrated below)

• For added versatility, the handles on these valves are also reversible, regardless of the orientation of the ball. However,

reversing the handle without adjusting the ball will cause the T-Flow logo to display the incorrect ow path. In this event,

an extra T-Flow sticker has been provided so that the handles may be updated accordingly. (Illustrated below)

1. Turn handle nut counter clockwise to

loosen nut. Remove nut and handle.

2. Grab stem with wrench or

pliers, turn stem 180°.

3. Replace handle in normal or reversed

position. Replace and tighten nut.

4. If necessary, use enclosed T-Flow

sticker to indicate correct ow path

on handle. T-Flow logo will match

“T” stamped on end of stem.

TFLOW-0512

1. Turn handle nut counter clockwise to

loosen nut. Remove nut and handle.

2. Replace handle in desired operating

position. Replace and tighten nut.

3. If necessary, use enclosed T-Flow

sticker to indicate correct ow path

on handle. T-Flow logo will match

“T” stamped on end of stem.

To Adjust Flow Path

To Reverse Handle

Normal

Handle

Reversed

Handle