User Guide

Select Location in General Direction of Cell Tower Install Inside Window Mount Cradle Insert the Outside Antenna into the Cradle
Connect Coax Cable to Outside Antenna
Connect Cables to Home 3G Connect to Power Supply
Select a location on the inside of a window as high as possible
and at least 20 feet from where the Home 3G will be located.
Note that this distance typically requires the window mount to be
in a different room from where you will locate the Home 3G and
Desktop Antenna. The window should face roughly in the direction
of the strongest cellular signal.
Clean the area on the glass with the alcohol prep pad (included).
Press the suction cups onto the window in the desired location.
Insert the Outside Antenna into the cradle.
Connect the supplied coax cable to the antenna lead cable on the
Outside Antenna. Route the cable as desired to the location of the
Home 3G. If you need to connect both coax cables, use the Cable
Connector provided.
Connect the coax cable to the Home 3G. Connect the Desktop
Antenna to the Home 3G.
Connect the AC Power Supply to the Home 3G then to a surge
protected AC power strip with at least a 1000 Joule rating. If your
Home 3G is working correctly, the lights will be green.
NOTE: If lights (lights may appear dim) are not green on your
weBoost booster, please refer to the full install guide online or
contact customer support at 1-866-294-1660 or email at
[e-mail].
1 2 3
4 5 6
window faces general
direction of cell tower
Full diagram on opposite side
Power Supply
Surge Protected
Power Strip
Outside Antenna
Press Cradle onto
window
Cable Connector
Home 3G
Desktop Antenna