Use and Care Manual

10
CELL SIGNAL BOOSTER DRIVE REACH OTR FLEET
______
Step 7: Connect Power
Supply To Booster
Connect the power supply cord to the end of the booster,
labeled “ .”
NOTE: Do NOT connect the power to the Signal Booster until you have
connected both the Inside and Outside Antennas.
Power Supply
from Outside Antenna
from Inside Antenna
BU-GDE000264-001-030220.indd 10BU-GDE000264-001-030220.indd 10 3/2/2020 10:41:53 AM3/2/2020 10:41:53 AM