User Manual

8
CELL PHONE SIGNAL BOOSTER DRIVE SLEEK OTR
______
Step 6: Connect System To
Power
Connect the power to the 12V
*
CLA port on your vehicle
and route power cable back to the booster.
Connect power cable to booster port labeled
.
NOTE: We recommend routing with the same path as the cradle/booster
cable (under mats and between seats).
NOTE: The booster will be on whenever there is power from the 12V CLA
port. If your vehicle always has power going to this port, you may want to
unplug this when you’re not driving so the booster does not drain your
battery.
*
Only 12V ports are supported.
connect
to booster
cable from power supply