Use and Care Manual

CELL PHONE SIGNAL BOOSTER DRIVE SLEEK OTR

______

Step 4: Route Antenna Cable

& Connect Booster

The included Velcro

can be used to mount the booster

out-of-the way on the ﬂ oor under a seat or mounted in the

back of the cab. It is best to mount in a place where the

cables cannot be tripped over or snagged (damaging

the booster).

Connect the cable from the outside antenna to the booster

port labeled

ANTENNA

by simply pressing the connector in until

you hear a “click”.

cable from

outside antenna

booster

Velcro

NOTE: Connecting cable from outside antenna to booster does not

take much force.

NOTE: The “hook” side of the Velcro

(already on the booster) can be

used to attach to the carpet of many vehicles.

bottom side of booster