Installation Guide

DRIVE SLEEK OTR CELL SIGNAL BOOSTER FOR TRUCKS

______

Step 3: Route Outside Antenna

Cable & Connect Booster

The included Velcro

can be used to mount the booster

out-of-the way on the ﬂoor under a seat or mounted in the

back of the cab. It is best to mount in a place where the

cables cannot be tripped over or snagged (damaging

the booster).

Connect the cable from the outside antenna to the cable

adapter then to the booster port labeled

ANTENNA

by simply

pressing the connector in until you hear a “click”.

ANTENNA

cable from

Outside Antenna

Booster

Cable

Adapter

Velcro

NOTE: Connecting cable from outside antenna to booster does not

take much force.

NOTE: The “hook” side of the Velcro

(already on the booster) can be

used to attach to the carpet of many vehicles.

bottom side of Booster