Installation Guide
2
CELL SIGNAL BOOSTER FOR TRUCKS DRIVE SLEEK OTR
______
Step 1: Select Mounting 
Location & Assemble the 
Outside Antenna
Depending on the type of truck, there may be built-in antenna 
mounting points. If the vehicle does not have built-in mounting 
points, the antenna includes a 3-way mount that will work on 
vehicles with mirror rails. The antenna will also work with third 
party CB antenna mounts. 
Select mounting location on vehicle. The outside antenna can 
be mounted in any CB mount or antenna mounting point on the 
vehicle. For best performance mount the antenna above the 
metal cab (it does not need to be above cab wind deflector).
NOTE: Mount at least 12 inches from any other antennas. Free of obstructions.
NOTE: If the vehicle is using two CB antennas with co-phase wiring, removing 
one antenna will cause reduced performance of the remaining CB antenna.
Typical Antenna
Mounting Points










