User's Manual

DRIVE REACH VEHICLE SIGNAL BOOSTER
7
______
Step 5: Connect Power
Supply To Booster
Connect the power supply cord to the end of the booster,
labeled “
”, then plug the power adapter into vehicle’s 12V
DC power supply. The Drive Reach will automatically power
on when plugged in. If your Drive Reach is working correctly,
the light on the power adapter will be red, and the light on the
booster will be green. Use only the power supply provided in
this package.
NOTE: If the 12V Cigarette Lighter port on your car is always on (even when
your vehicle is turned o) and you will be parking for extended periods of
time (more than a day), we recommend you turn the booster o by pushing
the LED light, which is also a button. This will prevent the Drive Reach from
draining the battery in your vehicle.
connect Power
Supply Cord
plug into vehicle’s DC
Power Supply