User Manual
2
Need help? www.weboost.com Customer Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
ENGLISH
IT IS VERY IMPORTANT
TO POWER YOUR SIGNAL
BOOSTER USING A SURGE
PROTECTED AC POWER
STRIP WITH AT LEAST A 1000
JOULE RATING.
FAILURE TO DO THIS WILL VOID YOUR WARRANTY
IN THE EVENT OF A POWER SURGE OR LIGHTNING
STRIKE.
! !
THE SIGNAL BOOSTER UNIT IS DESIGNED
FOR USE IN AN INDOOR, TEMPERATURE-
CONTROLLED ENVIRONMENT (LESS
THAN 150 DEGREES FAHRENHEIT). IT IS
NOT INTENDED FOR USE IN ATTICS OR SIMILAR
LOCATIONS SUBJECT TO TEMPERATURES IN
EXCESS OF 150°F.
Contents
Package Contents ......................................................3
Before Getting Started ..................................................3
Find the Strongest Signal ................................................3
Installation Details ......................................................4
Quick Install ...........................................................5
Outside Antenna Installation .............................................5
Inside Antenna Installation ...............................................5
Signal Booster Installation ...............................................6
Powering Up The Signal Booster ..........................................6
Troubleshooting & Understanding Lights ...................................6
Additional FAQ .........................................................7
Available Kit Options ...................................................8
Safety Guidelines .....................................................10
Signal Booster Specifications ...........................................11
Guarantee ............................................................12
Installation Instructions for the Following weBoost Signal Booster:
Connect 3G-X™ In-Building Wireless 800/1900 MHz
SmarTech
®
Signal Booster
Model # 470005 FCC ID: PWO460005 IC:4726A-460005
The term “IC” before the radio certication number only signies that Industry Canada technical specications were met.