User Manual

CONNECT 4G CELL PHONE SIGNAL BOOSTER

______

Test System: Lights

Fix Any Red Light Problems (red indicates oscillation)

• If you are happy with coverage, red lights don’t have to be resolved.

• Solid Red = Band has shut o

• Blinking Green/Red = Band has reduced gain

Each light corresponds to a frequency band.

No Lights

Booster does not have power. Un-plug and securely re-plug in power supply.

IMPORTANT: To get an accurate reading of the lights, unplug and re-plug

the power supply from the Booster.

Band 4

Band 5

Band 2

Band 12/13/17

skinny side

facing Cell Tower

1 Verify Outside Antenna faces away from the

Inside Antenna. Un-plug and re-plug in power

supply.

2 Verify the Inside Antenna is at least 18” from the

Booster and pointed away from the Booster. Un-

plug and re-plug in power supply.

3 Tighten all cable connections. You may want to

undo and redo the connection completely. Un-

plug and re-plug in power supply.

4 BEST: Increase the distance (horizontally or

vertically) between the Outside and Inside

antenna. Add cable if needed. Un-plug and re-

plug in power supply.