Specification Sheet

Find the Strongest Signal Outside Antenna Installation Connect Coax Cables to Connect 4G
Inside Antenna Location
Inside Antenna Installation
Connect to Power Supply
Check the bar indicator on your cell phone display and note where
the signal appears the strongest. NOTE: Cell phone bars are only
an approximation of signal strength and vary from phone to phone.
Be patient and repeat your signal check several times. NOTE:
Create a “soft” install rst by testing components in your proposed
locations before securing them with hardware.
Select a location on the roof or an outside wall where the Outside
Antenna can be mounted without obstruction. After connecting
the coax cable to the antenna, run it underneath the down side of
your roof’s ashing.
Refer to the full install guide for instructions on use of Window
Entry Cable at www.weboost.com/us/installguide/connect4G
Connect the coax cable from Outside Antenna to the Connect 4G.
Connect the coax cable from Inside Antenna to the Connect 4G.
Maintain a vertical distance of at least 20 feet or a horizontal
distance of at least 50 feet between the Outside Antenna to the
Inside Antenna.
After the desired location for the Inside Antenna has been
determined use the Wall Bracket and hardware to mount to the
wall.
Connect the AC Power Supply to the Connect 4G then to a surge
protected AC power strip with at least a 1000 Joule rating. If your
Connect 4G is working correctly, the lights will be green.
NOTE: If lights (lights may appear dim) are not green on your
weBoost booster, please refer to the full install guide online or
contact customer support at 1-866-294-1660 or email at
[e-mail].
1 2 3
4 5 6
Power Supply
Surge Protected
Power Strip
Inside Antenna
Wall Bracket
Drywall
Inside
Antenna
Connect 4G
Outside
Antenna
50 feet - horizontal distance
or 20 feet vertical distance
Directional Outside
Antenna
Directional Outside Antenna
Inside Panel Antenna