User Manual

2
CELL PHONE SIGNAL BOOSTER HOME 4G
______
Preparation
NOTE: These instructions will walk you through a “soft” install process to fi nd
the optimal locations for the inside and outside antennas, then through the
process of the permanent installation.
You Will Need (tools not included)
Make sure the following materials are prepared and ready for your
installation.
Ladder
Phillips-head screwdriver
10mm open-end wrench or adjustable wrench
Drill (if routing cable through wall)
1.25”-2” diameter pole existing pole (or order #901117)
Recommended: Power Strip with surge protection
1 to 2 hours
2 people (a person to help with antenna calibration)