User Manual
1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.
Window Mount:
PART# 304452 PART# 304472
Ceiling Mount:
PART# 304451 PART# 304471
Wall Mount:
PART# 301135 UPGRADE-PART# 301147
PART#301155
Outdoor Mount:
PART# 301157-50 Ohms
Optional In-Wall
Mount Accessory:
PART#301155
In-Wall Mounting
Bracket
(901123)
Wilson Signal Boosters Amplify Coverage
When used in conjunction with your antenna, a Wilson Electronics Signal
Booster can improve your cell phone and laptop data card coverage area
more than 20 times. Wilson Electronics manufactures a wide range of
Wireless, Direct-Connect and Adjustable Gain Signal Boosters for mobile
or in-building use.
See your dealer for details or visit www.WilsonElectronics.com.
See your dealer for details or visit
Appearance of device and accessories may vary.
Wide-Band Panel Antenna
Window, Ceiling, Wall & Outdoor Mounts
Window Mount Installation
Find the window that faces the direction of the nearest cell tower. The
signal strength function on your cell phone can help you determine this.
See the Technical Support section of Wilson
Electronics website,
www.WilsonElectronics.com,
for instructions on accessing the signal
strength function on your particular phone.
Choose an inside window location where the antenna will be hung.
Clean the window and the suction cups with glass cleaner.
It is important that the small tabs on each suction cup be facing outward
so they may be used to remove the antenna from the window if desired.
Use fi rm and even pressure to attach the antenna to the window without
breaking the glass. Avoid excessive or sudden pressure against the
glass.
Refer to Signal Booster instructions for separation requirements.
To be used as your outside antenna which communicates with the cell tower
Wide-Band
Panel Antenna
Window Cradle
Mount
Attach to Window
Slide Panel
Antenna into
cradle