Owner's Manual

3. When preparing to fire, point the gun towards the target and take a comfortable
stance.
Stingray only - If the safe has been applied, push it forward with the right
thumb to disengage.
Squeeze the trigger when ready to fire
ROUTINE CARE.
1. Do not fire the rifle without a pellet in the barrel. The only time you have to do
this is when adjusting the trigger pull.
2. Do not leave the rifle cocked or loaded when not in use. Leaving it cocked will
reduce the life of the mainspring.
3. After use, wipe the rifle with an oily rag to prevent corrosion. Use Weblube
gun oil.
4. Occasionally apply three or four drops of Weblube gun oil to:
a) Barrel pivot (2648).
b) Loading lever axis pin (1266).
c) Piston slots and skirt. Access is through the loading lever slots in the stock
and body tube assembly.
d) Piston seal. Access is through the air feed hole in the breech face.
IMPORTANT. SERIOUS DAMAGE TO THE PISTON SEAL MAY
RESULT IF IT IS EXCESSIVELY LUBRICATED.
e) Barrel locking plunger (2989)(fig.2).
Fig. 2 (The stock does not need to be removed to undertake this operation).