Owner's Manual

Fig.7.
MAJOR OVERHAUL OR REPAIR.
(For a qualified repairer)
Changing the Mainspring and Damper
The need to change the mainspring will become necessary only after the
rifle has been fired many thousands of times. The need to change will become
indicated by a gradual loss of pellet velocity not attributable to any other cause,
e.g. air leaks, mechanical damage, etc.
Removing the old mainspring
First ensure that the rifle is not cocked, then dismantle in the following sequence1.
Detach the stock assembly by removing the two stock fixing screws front
(1277), trigger guard screw front (2676), then the trigger guard screw rear (2368).