Owner's Manual

NOTE.
1. ALWAYS ENSURE THE MAGAZINE AND THE BARREL ARE NOT
LOADED WITH A PELLET BEFORE PROCEEDING WITH ANY
ADJUSTMENTS TO THE TRIGGER MECHANISM.
2. IF THE SEAR ENGAGEMENT SCREW IS ADJUSTED, ENSURE A
SUFFICIENT AMOUNT OF SEAR ENGAGEMENT WITH THE HAMMER IS
MAINTAINED TO ENSURE THE TRIGGER PULL HAS NOT BEEN SET
DANGEROUSLY SENSITIVE. TEST FIRE THE RIFLE PRIOR TO
RELOADING THE MAGAZINE.
ADJUSTING THE POWER.
The mechanism of this rifle has been factory set to ensure its power falls within the
current U.K. 12 ft.lbs. maximum kinetic energy limit allowed without possessing a
firearms certificate. The factory setting is tamper protected – any modifications made
to the factory setting will be evident and will invalidate your guarantee.
GENERAL MAINTENANCE.
WARNING!
NEVER ATTEMPT TO STRIP THIS RIFLE WHILST IT IS
PARTIALLY OR FULLY CHARGED.
SERIOUS INJURY AND/OR DAMAGE MAY RESULT IF THIS
INSTRUCTION IS IGNORED.
IF THE RIFLE DEVELOPS A FAULT.
Should the rifle develop a fault within the guarantee period, consult the dealer from
whom it was purchased. The guarantee does not cover parts inadvertently damaged,
nor rifles incorrectly assembled by the owner.
This rifle should only be dismantled by Webley personnel or by a competent gunsmith.
All components that may affect the performance of the rifle are tamper evident to
prevent unwarranted modifications.
3