User`s guide

WebEye E10/E104WebEye E10/E104 User’s Guide
68
2. Upgrade firmware with upgrading program
(1) Open ‘MS Dos’ window and practice a
command <c:\arp –d>.
(2) Select WebEye to update by clicking
on IP address or MAC address in the list.
When an IP address appears in the blanks
of “Selected IP address,” type in the
administrator’s password in the “Administ
-rator’s password” blank.
Click “Start” button.
(3) Click “Yes” button to confirm upgrading process.
(4) Click ‘OK’ button to start rebooting process.
(5) If WebEye has a different firmware version, the
program will ask if it should be replaced with a new
one. Confirm by clicking “Yes.”
(6)
The program will ask to format user file system. To
maintain any changes made to WebEye’s homepage, click
“No.” To format user file system and reload the default
settings, click “Yes.”
(7) When upgrade is complete, reboot WebEye by
clicking the “Ok” button.
(8) To upgrade other WebEyes, repeat the above process. Otherwise, click “Exit.”