User`s guide

WebEye E10/E104WebEye E10/E104 User’s Guide
49
VIII. Convenient Functions of Mouse (Pop-up menu)
A small window of 5 menus appears when you click the right button of
the mouse. However only a certain users who are permitted can utilize
the functions such as ‘Image Info’, ‘Quality Box’, ‘Focus Sensitivity’,
and ‘Image Quality’. And the results of the four functions are to be
affected in every image that is transmitted to all users. ‘Save File As’
menu is permitted to any user. (For detailed information, refer to ‘User
account management’ in Chapter VII).
1. Image Info
You may decide the color (black or white) of the information that is shown on the
left top of the image. And you may leave out the information. A user who has
‘Video control’ right may utilize this menu.
2. Quality Box
This is to set a certain area clear and remained area dull. You can overcome
insufficient network bandwidth with this function, because the file size is
reduced with unfocused area. Quality Box is to be set like under written
description.
• Choose ‘New QBOX’ button.
• Place mouse cursor on a certaion point of real time image where to start QBOX.
• Click and drag the mouse point.
You can also re-use previous QBOX area to focus again
by clicking ‘Enable QBOX’. ‘Disable QBOX’ is to finish.
The image activated Focusing Area function is seen in the
right. The image quality of outer area of QBOX is to be set
with ‘Ambient Level’ menu. The level is from 1 to 5. If
you select ‘Level 1’, the quality is similar to focused area.
And if you select ‘Level 5’, the unfocused area is shown
dark. A user who has ‘Video control’ right may utilize this
menu.
3. Focus sensitivity
You may configure movement degree of zoom mechanism. The sensitivity is from
Level 0 to Level 9. By selecting ‘Level 9’, user zooms in or out at the largest
degree. A user who has ‘PTZ control’ right may utilize this menu.
4. Image quality
It is to set image quality. The image quality is from Level 0 to Level 9. If user
chooses the ‘Level 9’, WebEye sends the finest image. However, transmission
frame rate will be reduced because of large sized data. If user chooses ‘Level 0’,