Installation guide

(4) Use WebEye server name as group ID.
(5) Press the “Apply” button.
<Note>
1. WebEye 2.0 should be set at WRS in following cases.
- When using DHCP in Ethernet
- When using xDSL (except using static IP)
In order to check after registering at WRS, refer to WebEye2 Configuration Tool or “Registered
WebEye list” at WebGate’s web site.
<Note>
If checking “Add Public List”, WebEye 2.0 is registered at public list and it can be searched.
URL address of registered WebEye list
http://www.webgateinc.com/webeyetable/view-webeye.php
5.4. Setting video
It is to set video input channel.
(1) Select video channel to set.
(2) Check “Enable”.
(3) Select video type (NTSC/PAL). (If video type is changed, WebEye should be rebooted.)
(4) When camera is installed reversely, check “Rotation 180’.
(5) Select image quality. (Q0~Q9)
(6) Press the “Apply” button after setting channel.
(7) Possible to move MD and PTZ setting pages with the “Move to MD Setup Page” and “Move to
PTZ Setup Page” buttons.
18