Installation guide

5.3.3.1. Setting dial out
(1) Select PSTN.
(2) Enter PSTN ISP phone number.
(3) Enter ISP User ID and Password, then press the “Apply” button.
<Note>
1. WebEye 2.0 E10 supports PPP among PSTN types.
2. User’s ID and password is supplied from each PSTN ISP.
3. For more information about login script, inquire of PSTN ISP.
4. In orde to use PSTN modem, set the related values of modem.
5. When accessing via Dial In, access ID and Password, which are set in FTP User Accounts, should be
entered.
5.3.4. Setting WRS(Dynamic IP registration)
If WebEye 2.0 E10 is installed on a network of dynamic IP address (floating IP address), administrator
should register the WebEye 2.0 E10 on dynamic IP registration server to give common users simple
connectivity. If not, no one can access the WebEye 2.0 E10 through Web browser. It is because that no
one knows IP address which one can access the WebEye 2.0 E10 with.
To solve the problem, WebGate runs WRS(Dynamic IP Registration Sever).
(1) Select a registration interval. (1 minute~24 hours)
(2) Enter server address. (default value : 210.116.114.37)
(3) Enter access token.
17