User`s guide

- 48 –
WebEye SPD User’s Guide
(6) Adapter installation : Adapter should be attached on the Ceiling
Suspension Bracket.
(7)-1 Fix the AC adapter on the included mounting plate (I) with 4
M3 screws
(7)-2 Screw the two included M3 bolts to the side of mounting
plate(J) leaving a margin of 1.2~2mm. Insert the assembled
mounting plate to the side hall and pull it down. And fasten the
two M3 bolts
(8) Connect the camera cable(G) to camera body.
(9) Connect output connector(H) of AC adapter to connector supply connector(K) of camera body
(10) Insert the three camera body holders(L) to the halls of suspension bracket and turn the body
clock-wise to fasten. And fix it with the included M3 screw(M).
* Caution
Must install WebEye SPD with power disconnected. Otherwise, you may drop the camera because
the dome part start turning when the camera data cable is connected.