Installation guide

Covert channel
With Covert menu, user can covert the channel in Live/Playback mode
In Covert menu, all channel lists will be shown and press [Enter] button and click mouse to tick
the channel. Checked channel will not show the video in Live/Playback.
User sequence configuration
User sequence can be edited. There are 16 user sequence mode and its interval is from 1 to
60seconds.
Multi-mode
The DVR has 3 predefined screen modes. 4C(4channels), 9C(basic 7 channels and additional 2
channels),10C(10 channels).
The way to composing
The way to compose screen is selecting the target and after selecting right window and press
[Enter] button or use mouse. If channel selection is down, press [ESC] button or click mouse
light button.
DVI Resolution
There are 9 resolution can be select 800x600@56Hz, 1024 x 768@60Hz, 1280 x
720@50Hz,1280 x 720@60Hz, 1920 x 1080p60, 1920 x 1080i50, 1920 x 1080i60, 1920 x
1080RB.
Display information
Display information is to configure which information will be shown on live view and playback
view. In live view, time, channel name, event, recording status, HDD, remote controller ID, text
can be set and in playback view, time,command,channel name, event, text can be configured.
Scan Mode
Support Over Scan / Under Scan Monitor.