Installation guide

Installaction & User Manual
98
6.4.1.2 Using Channel
Configure whether using camera or not.
After pressing [Enter], select it using left/right key or mouse wheel.
If user wants to enhance the recording or network monitoring speed, please, set the channel
disable.
6.4.1.3 AGC (Auto Gain Control)
AGC is the function to control the range of video signal input from camera connected.
Configure Enable/Disable using directional key or mouse wheel.
6.4.1.4 Brightness/Contrast
It can control Brightness and Contrast of video. After press [ENTER], use left/right button or
mouse wheel to set the value wanted from each “–9” to “+9”.
6.4.1.5 Privacy Mask
It makes the particular area to Mosaic. After Mosaic, the relevant area is displayed to black.
6.4.2 Monitor Setup
Main monitor provides all function which DVR supports and with spot monitor can use single
channel conversion.
Standard monitor is available to use all functions from DVR.
Alarm Popup
If specific channel uses MD, Sensor Input, it makes the relevant channel popups as single or
multi screen. To use this function, event should be set to ‘Always’ or ‘Custom’ and MD /
Sensor configuration should be done also.