Installation guide

6.4 Device Setup
This menu is for configuring each camera connected to DVR.
There are [name][Status][Color/black or white][Brightness][Contrast][PTZ] etc.
Caution : NTSC and PAL camera can not be used at the same time.
If changing the camera from NTSC to PAL, system should be rebooted.
Configured value will be applied to monitoring and search at the same.
6.4.1 Camera Setup
Select the camera to configure in Channel menu.
6.4.1.1 Title
Configure camera name.
If pressing [Enter] button or click mouse, test menu will be shown.
For text string, text input box will be shown.
- Use directional key for text input.
- With mouse, just click the text.
- Select the text using up/down and left/right button.
- After selecting the text, press [Enter].
- To delete the text, press [] button.
- To make a space between letters, press [].