Installation guide

6.3.3 Radius
It makes to manage account information from several different DVRs to one account using
Radius server. Please ask to Administrator before you use it.
To set Radius, Status, IP Address, Port should be set.
Set ‘Enable’ the status to use Radius and enter ‘Radius Server IP’ to IP Address.
Standard port to use is 1812 and specific port number which is from Server is also useable.
‘User ID’, Password’ and ‘Radius Shared Key ‘are needed from administrator of Radius server
after forwarding DVR account information to him.
Use ‘ID/Password/Shared key’ to register unit to Control Center.
Click the Radius Shared Key and enter ID, Passward, Shared Key.
Registration is completed of all information is correct.