Installation guide

DNS Server
DNS1 is mandatory item to registry and use WRS and it should be asked to network
administrator.
UPnP Port Forwarding
It configurates port of DVR automatically when DVR is used with internet hub.
Port
Port is necessary for Control Center and Webviewer connection.
Reference : Basic port is 80 and if using PPPoE modem and AP, be careful typing port
number.
Bandwidth
Menu for configuring network data transmission capacity. Without any additional configuration, it
works but if user wants to set, please let administrator do..
6.3.1 xDSL
DVR is connected to xDSL line and use PPPoE type, please change type by xDSL and
configure user ID and Password. User ID and Password should be same as xDSL.
User ID/Password
Configure user ID and Password.
Status
It shows connection status of DVR.