Installation guide

Installaction & User Manual
92
6.3 Network
This is menu for configuring network.
Type
Configure type of Network (Ethernet/xDSL). If connected to cable modem or LAN directly to
DVR, configure by “Ethernet”.
If DVR connects to xDSL- one of PPPoE type, configure xDSL. But if it is not type of PPPoE,
configure ‘Ethernet’.
DHCP
With DHCP (Dynamic Host Configuration Protocol), all hosts connected to LAN can get Public
IP address temporary.
If LAN has DHCP server and it is active, DHCP server allocate IP address to DVR.
Mostly middle and large network use DHCP server in LAN, but in case of small network,
NAT(Network Address Translation) of HUB is general.
IP Adders
IP Address is for the connection between DVR and Control Center and also for web connection
from Webviewer. (But, Net Mask, Gateway should be configured.)
Net Mask
Net Mask makes range of IP address available. It should be received from network
administrator.
Gateway
Gateway is necessary to communicate IP, it should be received from network administrator.