Installation guide

Installaction & User Manual
78
6.2.1.2 NTP Setup
NTP(Network Time Protocol) make time of connected devices synchronized. There are NTP
server and client which get time signal from the server.
Sync NTP
Set NTP function on/off.
NTP Mode
Configure NTP mode of DVR – Client / Server / All
NTP Server Loc.
When NTP mode is client, it is on Enable. Configure yes or no whether NTP server is in Local
Network or Public.
NTP Local server IP
In NTP local server Enable, configure server ip. Input IP address of NTP server or DVR set by
NTP server in local network.
Interval
Configure interval of time sync.
Caution: If use NTP client mode, user must set NTP on.