Installation guide

Installaction & User Manual
60
4.5 Auto Switch Mode (Sequence)
Defined channels or multi screens can be displayed in sequence with configurated time interval.
Maximum 16 channels or multi screens can be defined.
.
4.5.1 System Standard Mode
By [SEQ] button, it can monitor auto switching of defined channels.
Press [MENU] for the setting switching term or using mouse click menu icon from function
menu.
Move to “Device” “Monitor” from OSD menu.
Select “Monitor” under ‘Device” with [Enter] button or mouse click. Set value from 1 sec. to 60
sec. At OFF set, auto switch mode does not operate
Auto Switch mode can be set in every division mode by the press [SEQ] button.
Press [SEQ] button once more to leave from Auto Switch mode.