Installation guide

Installaction & User Manual
52
Set the ID using driver. The value for the first digit of switch should match with values of 100x on
the rare panel while the second digit of switch should match with value of 10x and the third digit
of switch should match with 1x on the rare panel
2.3.7.3 Power connection and operation
(1) Connect power as below.
(2) As soon as power is connected, the device starts booting.
<Note>
1) It takes around 1 minute to connect NVS04R and DVR after connecting power.
Four LEDs at the front starts blinking and they are fully on when connection is completed. The
HDD list is available to check at Disk Manager
2) Refer the manual of “NVS04R installation and user guide” for detailed explanation..